D
4. Finally, fit the frames on the spacers A.
! Do not place the sliding racks in position 5.
Assistance
Warning:
The appliance is fitted with an automatic diagnostic
system which detects any malfunctions.
Malfunctions are signalled through messages of the
following type: "F", followed by numbers.
Call for technical assistance in the event of a
malfunction.
! Never use the services of an unauthorised
technician.
Please have the following information to hand:
• the type of problem encountered;
• the appliance model (Mod.);
• the serial number (S/N).
The latter two pieces of information can be found on
the data plate located on the appliance.
3. Secure the two
frames with the guide
rails using the holes
provided on the oven
walls (see diagram).
The holes for the left
frame are situated at
the top, while the holes
for the right frame are
at the bottom.
GB
25