Sony VPL-SC50U Manual De Instrucciones página 22

Projecting
To get the clearest picture
22
(EN)
4
Turn the zoom ring to adjust the size of the picture.
5
Turn the focus ring to adjust the focus.
Note
Do not look into the lens when the projector lamp is on.
To
Adjust the volume
Cut off the sound
Cut off the picture
You can adjust the dot phase when a signal from the computer is input.
For details on DOT PHASE, see page 27 (EN).
1
Press the DP key on the control panel.
2
Press the B/b key on the Remote Commander or on the control panel
to adjust the dot phase.
Adjust the picture to where it looks clearest.
You can also adjust the dot phase through the menu.
For details, see "The INPUT SETTING menu" on page 27 (EN).
Press
the VOLUME +/– keys on the control
panel or on the Remoter Commander.
the AUDIO MUTING key on the
Remote Commander. To restore the
sound, press the AUDIO MUTING key
again or press the VOLUME + key.
the PICTURE MUTING key on the
Remote Commander. To restore the
picture, press the PICTURE MUTING
key again.