Abicor Binzel MB ERGO 14 Instructivo De Servicio página 11

MB/RAB
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Designated Use
2 Technical Data
3 Safety Instructions
3.1 Classification of the warnings
3.2 Emergency information
4 Putting into operation
4.1 Equipping the torch
4.2 Installing the spiral wire liner
4.2.1 Spiral wire liner
4.2.2 PA liner
4.3 Mounting the cable assembly
4.4 Setting the shielding gas quantity EN-8
4.5 Feed in wire
EN-3 5 Handle operating elements EN-8
5.1 Trigger with two-position function EN-8
EN-3
6 Operation
EN-5
EN-5 7 Removal from service
EN-5
8 Maintenance and cleaning EN-10
EN-5
EN-6
EN-6
EN-6
EN-7
EN-7
EN-8
EN-9
EN-9
EN - 2