Setting Up And Mounting - Cameo LED TS 40 WW Manual De Usuario

Menu
Sys Info
Sys Info
Temp = Temperature display of the LED unit
Op.Hours = Operating time display
Firmware = Displays the device software version

SETTING UP AND MOUNTING

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on a flat surface.
Mounting on a truss is performed with the help of a suitable truss clamp (not included). Make sure that the connection to the mounting
bracket is solid, and secure the device with a suitable safety rope to the safety eyelet provided. Important Notice: Overhead installation
should only be carried out by trained personnel.
WINGED BARNDOOR AND FILTER FRAME MOUNTING / REMOVAL
To install or remove the winged barndoor and the filter frame, please press on the spring-loaded button of the
locking mechanism and fold it upwards. Place the locking mechanism in the same way in the original position.
Sys Info Sys Info
Temp Op. Hours
Sys Info
Firmware
Temp LED xxC / xxF
Temp C°/F° °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Hour Total Displays the total operating time in hours
Vx. xx
13