Disconnecting/Reconnecting - Bosch BCR1 Serie Instrucciones De Uso

Home Connect
21
86
2. Follow the instructions in the Home Connect app as
well as in the enclosed Home Connect brochure.
Information
For more information
your Roxxter to the Home Connect app, visit
https://www.home-connect.com/gb/en/help-support/
set-up. The Home Connect app also contains other vi-
deo tutorials about the Roxxter's functions.

Disconnecting/reconnecting

You can disconnect the robot vacuum from your Wi-Fi
network at any time.
Information
If the robot vacuum is disconnected from your Wi-Fi
network, you will not be able to control it via Home
Connect.
21
Fig.
Press the "Wireless network" button (which will be
lit white or green) on the control panel twice within
1 second.
The "Wireless network" button will go out after ap-
proximately 2 seconds, indicating that the robot va-
cuum has been disconnected from the Wi-Fi network.
Pressing the "Wireless network" button again will
reactivate the vacuum robot's wireless networking
function. If the robot vacuum was connected to a Wi-
Fi network before, it will reconnect to this network.
on how to connect
en