Tabla de contenido
Publicidad
MANUAL DE USUARIO - OPTIMA-31 10K / 20K / 30K
PANTALLAS SEGUN MODO DE OPERACION
El UPS mostrará de forma alterna diferentes pantallas con la información indicada a continuación:
Operating mode/status
UPS Power On
Description
LCD display
No-output mode
Description
LCD display
www.xmart-ups.com
When UPS is powered on, it will enter into this mode for a few seconds as initializing the CPU and
system.
When bypass voltage/frequency is out of acceptable range or bypass is disabled (or forbidden), UPS
will enter into no-output mode if powering on or turning off the UPS. It means the UPS has no output.
Alarm beeps every two minutes.
Only if UPS is connected to parallel system
V. 170502-OPT-31 10K/20K/30K (SPANISH) -
29
Publicidad
Tabla de contenido
