Before Using For The First Time; Preparing The Base Unit; Assembling The Continuous Feed Shredder - Bosch VeggieLove MUZ5VL1 Instrucciones De Uso

Note: Spare parts with a predeter-
mined breaking point are not covered
by our warranty obligations. A new
disc holder is available from cus-
tomer service under order number
00630760.

Before using for the first time

Before using for the first
time
Prepare the base unit and the ac-
cessories for use.

Preparing the base unit

Note: The food processor shown in
the pictures may differ from your
model in terms of shape and fea-
tures.
Set up the base unit as described
1.
in the main operating instructions.
Press the release button and raise
2.
the swivel arm until it engages.
→ Fig.
3
Place the bowl in the base unit.
3.
→ Fig.
4
Turn the bowl anticlockwise until it
4.
engages.
→ Fig.
5
Press the release button and push
5.
the swivel arm down until it en-
gages in position 1.
→ Fig.
6
Press down the protective cover
6.
for drive 2 at the marking
remove.
→ Fig.
7
Assembling the continuous
feed shredder
WARNING
Risk of cutting!
The cutting discs have sharp blades
and edges.
Only take hold of the cutting discs
▶
by the edge.
Never touch the sharp blades and
▶
edges with bare hands.
WARNING
Risk of injury!
Improper use may cause injuries.
Never assemble the accessories
▶
on the base unit.
Grip the disc holder level with the
1.
wings.
→ Fig.
The two plastic tips must point up.
Take hold of the required cutting
2.
disc by the edge and fit onto the
disc holder with the side you re-
quire facing up.
Fit single-sided discs with the
‒
blades or serrations facing up.
Fit reversible slicing discs with
‒
the required marking facing up.
→ "Markings on the reversible
slicing discs", Page 18
→ Fig.
Insert the disc holder with the cut-
3.
ting disc into the housing.
→ Fig.
and
Place the lid on the housing.
4.
→ Fig.
Markings
up.
Rotate the lid clockwise until it en-
5.
gages.
→ Fig.
Markings
up.
Before using for the first time en
8
9
10
11
and must match
12
and must match
19