®
Audio
Bluetooth
playback
(X-EM26 only)
∫ Music playback using Bluetooth
wireless technology
Bluetooth wireless technology
Bluetooth wireless technology
Device not equipped with Bluetooth
Bluetooth
Music data
The unit is capable of playing back music stored on
Bluetooth capable devices (cell phones, digital music players
etc.) wirelessly. You can also use a Bluetooth audio
transmitter (sold separately) to enjoy music from devices that
do not have Bluetooth functionality. Please refer to the user's
manual for your Bluetooth capable device for more details.
®
• The Bluetooth
word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc.
• The Bluetooth wireless technology enabled device
must support A2DP profiles.
• Connection is not always guaranteed with all Bluetooth
enabled devices.
∫ Remote control operation
The remote control supplied with this unit allows you to
operate Bluetooth wireless technology enabled devices.
• The Bluetooth wireless technology enabled device
must support AVRCP profiles.
• Remote control operations cannot be guaranteed for all
Bluetooth wireless technology enabled devices.
enabled device:
Cell phone
enabled device:
Digital music player
wireless technology:
Digital music player
+
®
audio transmitter
(commercially available)
Pairing with the unit (Initial
registration)
In order for the unit to playback music stored on a Bluetooth
capable device, pairing must first be performed. Pairing
should be performed when first using the unit with the
Bluetooth capable device, or when the pairing data on the
device has been erased for any reason.
Pairing is a step required to allow communication using
Bluetooth wireless technology to be carried out.
• Pairing is only performed the first time that you use the
unit and the Bluetooth capable device together.
• In order to allow communication using Bluetooth
wireless technology to take place, pairing must be
performed on both the unit and the Bluetooth capable
device.
1
Press INPUT on the remote control or
INPUT repeatedly on the main unit to switch the
source to [BT AUDIO].
The Bluetooth indicator blinks.
If there is no pairing information in the system, such as when
using a Bluetooth device for the first time after purchasing
the system, the system will automatically switch to pairing
mode.
2
Press MODE on the remote control.
(For operating with this unit) Press and hold INPUT until the
Bluetooth indicator starts to flash quickly.
• This unit switches to pairing mode, and the Bluetooth
indicator starts to flash quickly. (Go to step 4)
3
Press / to select [PAIRING], and then
press
.
• This unit switches to pairing mode,and the Bluetooth
indicator flashes quickly.
4
Turn on the power to the Bluetooth capable
device that you wish to pair with, and perform
pairing procedure on it.
• This unit will be displayed as "Pioneer X-EM26" on all
Bluetooth capable devices that you have.
Pairing will start.
• Place the Bluetooth capable device close to the unit.
• Please refer to the user's manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
• When PIN code entry is requested, enter "0000". (This
unit does not accept any PIN code setting other than
"0000".)
5
Confirm that [BT AUDIO] appeares on the
display and the Bluetooth indicator switches
from blinking to staying lit.
• If the Bluetooth indicator will not switch from blinking to
staying lit, the pairing was not completed correctly so
please try pairing with the unit again.
• If paring has been completed correctly, you need not
repeat this procedure again.
Even devices that have already been paired with this unit will
not connect during pairing mode in the following cases.
In such cases, delete pairing history from the Bluetooth
wireless technology device and perform pairing again.
• Up to 8 pairing history can be recorded with this unit. If
connecting to a Bluetooth wireless technology device
over 8 units, the oldest pairing history will be deleted.
11
En