Control Functions - Cameo CLSTORM Manual De Usuario

INTRODUCTION:
3 IN 1 LED/LASER EFFECT PROJECTOR
CLSTORM

CONTROL FUNCTIONS:

• 10-channel DMX controller
• Separate control of laser, Derby and strobe effects
FEATURES:
• DMX-512 control
• Master / Slave mode
• Operating voltage 100 V - 240 V AC
• Power consumption 50 W
• Standalone programs
• Music control via built-in microphone
• Adjustable mounting bracket included
Laser Effect
• Red diode with 100 mW / 650 nm
• Green diode with 50 mW / 532 nm
• 8 laser effects
• 74° beam angle
Derby Effect
• One 3W R, G, B, W and A LED each
• Rotating reflection mirror
• 8-way lens system
• 68° beam angle
Strobe Effect
• 8 white 1 W LEDs
• 8° beam angle
• 9 programs plus Full On
• Flash frequency up to 30 Hz
OPERATION:
The Cameo CLSTORM is an effect projector which combines a Derby, a laser and a strobe effect. All three effects
can be controlled independently. The Cameo effect projector can be used both individually and in master/slave
mode, with music control, and via DMX-512 protocol.
7