Cameo CLSTORM Manual De Usuario página 10

CONNECTIONS, CONTROLS AND INDICATORS:
11 LOCK ON/OFF
Lock switch for turning the laser effect on and off. In OFF position, the laser effect is disabled; in the ON
position, it is enabled. Two keys are included.
12 REMOTE
Connection possibility for an optional switch for deactivating the laser effect.
If no switch is connected, the supplied adapter plug must be used for the device to work.
13 POWER IN
IEC power socket with built-in fuse holder. Connection via the included IEC power cord.
IMPORTANT INFORMATION: Replace the fuse only with a fuse of the same type and rating. If the fuse blows
repeatedly, please contact an authorised service centre.
POWER OUT
14
IEC mains output socket. Used to supply power to additional CAMEO projectors. Make sure that the total cur-
rent consumption in amperes (A) of all connected devices does not exceed the specifi ed value on the device.
EYELET FOR SAFETY CABLE
15
Overhead installation may only be carried out by trained personnel. The projector must be secured with an
appropriate safety cable to prevent falling.
10
11 12
13 14
15