Tabla de contenido
Publicidad
MIRRORED DISPLAY
With this function, letters, numbers and symbols can be displayed horizontally or vertically or mirrored horizontally or vertically on the LED matrix
panel. Press the MODE button repeatedly until "Inve" appears on the display and confirm by pressing ENTER. Using the UP and DOWN buttons, select
the desired option and confirm with ENTER.
-> ENTER->
SYSTEM SETTINGS AND SYSTEM INFORMATION
To be able to adjust or read system settings and information, press the MODE button repeatedly until "Sett" appears on the display. Confirm with
ENTER. Now you can select and modify one of the following menu items using the UP and DOWN buttons:
-> ENTER ->
<- MODE
16
UP/DOWN
Mirroring
disabled
-> ENTER ->
UP/DOWN
<- MODE
Display is rotated
by 180°
(overhead mounting)
-> ENTER ->
<- MODE
on = display always on
off = display goes off
after about 60 seconds of
inactivity
-> ENTER ->
<- MODE
Using this menu item, you can define which
mode is to be activated, should the DMX
input signal be lost in the DMX mode.
-> ENTER ->
<- MODE
Setting the
Dimmer curve
-> ENTER ->
<- MODE
Dimmer response
-> ENTER ->
<- MODE
displays the
firmware version
-> ENTER ->
<- MODE
Displays the device
temperature in °C
-> ENTER ->
<- MODE
Displays the operat-
ing time in hours
-> ENTER ->
<- MODE
LED Test
Functional test of all
LEDs from 1 to 25.
Display flashes
during test. Press
MODE or ENTER
to exit.
horizontal
Mirroring
UP/DOWN
UP/DOWN
UP/DOWN
last DMX command
is held
UP/DOWN
Dimmer curve
Dimmer curve
linear
exponential
The light intensity
Adjustment of the
increases linearly
light intensity is
with the DMX value.
finer in the lower
DMX value range
and coarser in the
upper DMX value
UP/DOWN
The light reacts
The light behaves
abruptly to changes
in a manner
in the DMX value.
similar to that of a
halogen lamp with
gentle changes in
brightness.
vertical
horizontal and
Mirroring
vertical mirroring
-> ENTER
<- MODE
-> ENTER
<- MODE
-> ENTER
<- MODE
Blackout
Music control
Dimmer curve
logarithmic
Adjustment of the
light intensity is
coarser in the lower
DMX value range
and finer in the
upper DMX value
range.
range.
-> ENTER
<- MODE
-> ENTER
<- MODE
-> ENTER
<- MODE
S-curve
Adjustment of the
light intensity is fine
in the lower and
upper DMX value
ranges and coarse
in the middle DMX
value range.
Publicidad
Tabla de contenido
