SEVERIN KM 3909 Instrucciones De Uso página 13

Operation settings
We recommend using the switch setting P.
The right degree of chopping/mincing (from
coarse to fi ne) for meat, onions, dried fruit,
celery, fi sh etc. is normally achieved after
15-30 seconds.
Puréeing
The bowl can be fi lled with a maximum of
1 litre of cold liquid (e.g. soup). Ensure,
however, that the temperature is not above
80 °C.
∙ Always start processing at speed level I;
increase to level II if necessary.
Kneading
∙ Fit the drive shaft to the drive unit.
∙ Attach the bowl with the handle to the
right and turn it clockwise to lock until
the lock symbol and triangular mark are
aligned.
∙ Fit the drive shaft extension to the drive
shaft.
∙ Fit the kneading insert to the drive shaft
extension so that the insert almost
touches the bottom of the bowl.
∙ Put the lid on the bowl and turn it
clockwise until it locks into place.
∙ For safety reasons, use the appropriate
pestle at all times when feeding the
ingredients down the food chute. During
operation, the pestle should remain
inserted.
Note:
∙ Put the ingredients into the bowl. For
700 g of dough, about 400 g of fl our and
290 ml of water are needed.
∙ When making dough, the appliance
should not run for more than 60 seconds
at a time, after which it should be allowed
to cool down for 1 minute. A maximum of
5 such cycles should not be exceeded,
after which the appliance must be allowed
to cool down completely.
Operation settings
∙ Always start processing at speed level I;
increase to level II if necessary.
∙ The dough is ready once it has formed
into a ball.
Slicing and grating
∙ Fit the drive shaft to the drive unit.
∙ Attach the bowl with the handle to the
right and turn it clockwise to lock until
the lock symbol and triangular mark are
aligned.
∙ Fit the desired attachment to the insert
mounting and push it down until it is heard
locking into place.
∙ Fit the attachment mounting to the drive
shaft.
∙ Put the lid on the bowl and turn it
clockwise until it locks into place.
∙ For safety reasons, use the appropriate
pestle at all times when feeding the
ingredients down the food chute. During
operation, the pestle should remain
inserted.
∙ Always switch the appliance on before
feeding the ingredients down the food
chute.
∙ Do not put in more than 1 kg of food.
When processing larger quantities, the
bowl must be emptied from time to time.
13