OPTIKA MICROSCOPES B-500DK Manual De Instrucciones página 25

7.0 USING THE RECHARGEABLE BATTERIES
• Pull the battery holder toward yourself, in order to extract it.
• Remove the two-poles connector from the battery-holder:
• Remove the 6 batteries inside the holder and replace them with the new one (pay attention
to the correct polarity of each battery).
• Reconnect the two-poles connector and replace the battery holder inside the microscope.
• Close the back plastic cover with the four screws.
Please note:
Use ONLY this type of battery: AA NiMH 1.2V, capacity at least 2500mAh.
Respect your local regulation for the disposal of nickel-metal hydride batteries.
Page 25