Introduction Of Advanced Multi-Cd Player Operation; Repeating Play; Playing Tracks In Random Order - Pioneer DEH-P55BT Manual De Instrucciones

Multi-CD Player
Introduction of advanced
multi-CD player operation
1 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)—DISC LIST (disc title list)—
RDM (random play)—SCAN (scan play)—
PAUSE (pause)—COMP (compression and
DBE)—ITS-P (ITS play)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

There are three repeat play ranges for the
multi-CD player: RPT :MCD (multi-CD player
repeat), RPT :TRK (one-track repeat) and
RPT :DSC (disc repeat).
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
1 1 1 1
2 Push MULTI-CONTROL left or right to
select the repeat range.
Push MULTI-CONTROL left or right until the
desired repeat range appears in the display.
! RPT:MCD – Repeat all discs in the multi-
CD player
! RPT:TRK – Repeat just the current track
! RPT:DSC – Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to RPT:MCD.
! If you perform track search or fast forward/re-
verse during RPT:TRK, the repeat play range
changes to RPT :DSC.
! When you select RPT:DSC for the repeating
range and return to the playback display,
DRPT is displayed.

Playing tracks in random order

Random play lets you play back tracks in ran-
dom order within the repeat range, RPT :MCD
and RPT :DSC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3 Push MULTI-CONTROL up to turn ran-
dom play on.
Tracks will play in a random order within the
previously selected RPT :MCD or RPT :DSC
ranges.
# To turn random play off, push
MULTI-CONTROL down.
Section
09
47
En