Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer DEH-P55BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section

Audio Adjustments

12
Introduction of audio
adjustments
5 5 5
4 4 4
3 3 3
Important
When phone is selected as a source, no audio ad-
justments, except balance adjustment and
source level adjustment, are possible.
1 Audio display
Shows the audio adjustment status.
2 FIE indicator
Shows when the front image enhancer is
turned on.
3 SW indicator
Shows when the subwoofer output is turned
on.
4 BASS indicator
Shows when the bass boost is in effect.
5 Loudness indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)—POWERFUL
(equalizer)—EQ (equalizer curve adjustment)
—LOUD (loudness)—SUB W (subwoofer on/
off setting)—S/W (subwoofer setting)—HPF
(high pass filter)—BASS (bass boost)—FIE
58
En
1 1 1 1
2 2 2
(front image enhancer)—SLA (source level ad-
justment)
# When the subwoofer controller setting is
P/O :FUL, you cannot switch to SUB W. (Refer to
page 65.)
# You can select the S/W only when subwoofer
output is turned on in SUB W.
# When the F.I.E. function is on, you cannot se-
lect HPF.
# When the rear output setting is R-SP :S/W,
you cannot select FIE.
# When the HPF function is on, you cannot se-
lect FIE.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1
Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido