Initial Settings; Adjusting Initial Settings; Setting The Date; Setting The Clock - Pioneer DEH-P55BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1
Press SOURCE and hold until the unit
turns off.
2
Press FUNCTION and hold until function
name appears in the display.
3
Press FUNCTION to select one of the in-
itial settings.
Press FUNCTION repeatedly to switch be-
tween the following settings:
Calendar—Clock—CLOCK (off clock)—FM
(FM tuning step)—A-PI (auto PI seek)—
WARN (warning tone)—AUX1 (auxiliary
input1)—AUX2 (auxiliary input2)—R-SP (rear
output and subwoofer controller)—TEL (tele-
phone muting/attenuation)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.

Setting the date

You can adjust the calender display, which
can be displayed when the sources are off.
1
Press FUNCTION to select calendar.
Press FUNCTION repeatedly until calendar ap-
pears in the display.
2
select the segment of the calendar display
you wish to set.
1 1 1 1
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
1
Press FUNCTION repeatedly until clock ap-
pears in the display.
2
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will blink.
Push MULTI-CONTROL left or right to
Push MULTI-CONTROL up or down to
Press FUNCTION to select clock.
Push MULTI-CONTROL left or right to
Section
13
63
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido