Singing Machine iSM1030BT Manual De Instrucciones página 11

iSM1030-update-v4-ENG-SPA_Layout 1 6/27/13 10:38 AM Page 10
Connection
Connecting the Microphones and Headphones
Connecting the Tower Speakers
1
To protect the speakers, make sure the iSM1030BT is off and the MASTER VOLUME and
the MIC 1 and 2 VOLUME controls are set to minimum.
2
Connect the right speaker's plug to the Right Speaker jack and the left speaker's plug to
the Left Speaker's jack.
3
Turn the power on and slowly raise the MASTER VOLUME and the MIC 1 and 2 VOLUME
controls to a comfortable level.
Microphones:
Insert a microphone's plug into the Mic 1
jack u. Insert the other microphone's plug
into the Mic 2 jack v (if desired).
Note: Do not drop or tap the mic as
damage to the mic or speakers may occur.
Do not spin the microphone around for the
same reason.
Headphones:
For private listening, use headphones (not
included). Insert a headphone's plug into the
Headphone jack w. Disconnect when finished
so the included speakers can be used.
10