Singing Machine iSM1030BT Manual De Instrucciones página 21

iSM1030-update-v4-ENG-SPA_Layout 1 6/27/13 10:39 AM Page 20
Operation
Using the AUX Jack
1
Connect the unit as described
previously. Press the ON/STANDBY
button to turn the unit on; the
On/Standby indicator will light blue
and the LCD Screen will start up.
2
Connect the external unit to the
VIDEO/AUX in jacks on the rear of this
unit as shown on page 8.
Notes:
• It is highly recommended to set the volume
on the auxillary unit to 1/3 or lower to
avoid distortion.
• Skipping files/tracks is not possible when
using an external device.
3
Repeatedly press the FUNCTION
button until the LCD Screen shows Aux
to select the Aux mode.
4
Slide the MONITOR switch to the On
(right) position to view the video from
the external device or slide to the Off
(left) position to turn the LCD Screen
off.
5
Connecting an external unit will allow
the audio and video to be played
through your Singing Machine.
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
7
Connect microphone(s) as shown on
page 10, and slide the ON/OFF button
switch on the microphone to power it
off.
20