Hilti DD-750 HY Manual De Instrucciones página 25

General description and technical data for the DD-750 HY
The DD-750 HY is a universal, high-performance core drilling system with a 4-speed gearbox. It is
suitable for drilling holes within the range 52 mm – 750 mm dia. It can be powered either by the
D-LP15 hydraulic unit (fixed oil flow rate) or by the D-LP32 (with variable oil flow rate). The modular
concept permits angular drilling and the use of different baseplates employing different fastening
methods. The DD-750 HY can be operated with manual control of drilling feed pressure or with a
hydraulic feed unit. The D-R..L rails used by the drilling system can also be used with Hilti wallsaw
systems. Diamond core bits incorporating the Hilti DD-BU quick-change interface or with UNC
threaded connection ends can be fitted.
DD-750 HY technical data
Drilling dia. range:
Power output:
Oil flow rate:
Operating pressure:
Motor capacity:
Torque:
Max. permissible water supply pressure:
Gearing:
Chuck:
Dimensions of drilling motor (L x W x H):
Weight (drilling motor):
Weight (drilling rig DD-BA 3-70, D-R100-L):
Noise and vibration information:
Typical A-weighted sound power
level in accordance with ISO 3744:
Typical A-weighted emission sound pressure
level at the operator's ear using remote control
(4 m distance) in accordance with EN 11201:
Typical A-weighted emission sound pressure
level at the operator's ear using manual control
(4 m distance) in accordance with EN 11201:
Wear ear protection!
Uncertainty for the given sound level is:
Total triaxial vibration value at the spider wheel during manual advance, as per ISO 5349
(vibration vector sum)
Drilling in concrete (wet) a
Uncertainty K:
NOTE
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN ISO 5349 and may be used to compare one tool with ano-
ther. It may be used for a preliminary assessment of exposure. The declared vibration emission
level represents the main applications of the tool. However if the tool is used for different appli-
cations, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the
Printed: 22.10.2015 | Doc-Nr: PUB / 5069605 / 000 / 03
:
h, DD
52–750 mm
max. 11 KW
max. 60 l / min.
max. 170 bar
20 ccm
max. 710 Nm
6 bar
4-speed
DD-C-BU / DD-C-BS
355 x 215 x 520 mm
30 kg
43 kg
104 dB(A)
80 dB (A)
94 dB (A)
3 dB
1.5 m/s 2
1.5 m/s 2
1 /
ʺ
4
25