Pioneer VSX-832 Manual De Instrucciones página 50

> Before Start > Part Names
0 To name a preset radio station, press TUNER on the remote controller, select AM/FM and
select the preset number.
0 It cannot be set if the "NET", "USB" or "BLUETOOTH" input is selected.
∫ Audio Select
Select the priority for input selection when multiple audio sources are connected to one input
selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO
IN jack. The setting can be separately set to each input selector. Select the input selector to
configure. Note that there are some default values you cannot change.
Audio Select "ARC": When giving priority to input signal from ARC compatible
TV.
0 The setting can be selected only when "Hardware" - "HDMI" -
"Audio Return Channel" is set to "Auto" and also the "TV"
input is selected.
"HDMI": When giving priority to input signal from HDMI IN jacks.
0 The setting can be selected only when the input is assigned to
the HDMI jack in the "Input/Output Assign" - "HDMI Input"
setting.
"COAXIAL": When giving priority to input signal from DIGITAL
AUDIO IN COAXIAL jacks.
0 The setting can be selected only when the input is assigned to
the COAXIAL jack in the "Input/Output Assign" - "Digital Audio
Input" setting.
"OPTICAL": When giving priority to input signal from DIGITAL
AUDIO IN OPTICAL jacks.
0 The setting can be selected only when the input is assigned to
the OPTICAL jack in the "Input/Output Assign" - "Digital Audio
Input" setting.
"Analog": To always output analog audio independently of the
input signal
0 The setting can be selected only when the input is assigned to
the AUDIO jack in the "Input/Output Assign" - "Analog Audio
Input" setting.
(Default value: BD/DVD: HDMI, CBL/SAT: HDMI, GAME: HDMI,
STRM BOX: HDMI, AUX: Analog, CD: COAXIAL, TV: OPTICAL)
50
> Install > Initial Setup > Playback
Advanced Setup
Fixed PCM Select whether to fix input signals to PCM (except multi-channel
PCM) when you have selected "HDMI", "COAXIAL", or
"OPTICAL" in the "Audio Select" setting. Set this item to "On" if
noise is produced or truncation occurs at the beginning of a track
when playing PCM sources. Select "Off (default value)" normally.
0 The setting to changes to "Off" each time the "Audio Select"
setting is changed.
0 This setting cannot be changed if the "TUNER", "NET", "USB" or "BLUETOOTH" input is
selected.
| Supplementary Information | Others