Rear Panel - Pioneer VSX-832 Manual De Instrucciones

> Before Start > Part Names


Rear Panel

1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio
signals with a digital optical cable or digital coaxial cable.
2. VIDEO IN jacks: Input the video signals of an AV component with an analog video cable.
3. NETWORK jack: Connect to the network with an Ethernet cable.
4. USB jack: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (5 V/500 mA) to USB devices with a USB cable.
5. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless
technology enabled device. Adjust their angles according to the connection status.
6. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
7. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
6
> Install
    
  
> Initial Setup > Playback


8. Power cord
9. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
10.ANTENNA AM LOOP/FM UNBAL 75≠ jacks: Connect the supplied antenna.
11. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
12.SPEAKERS jacks: Connect speakers with speaker cables. (North American models are
banana plug ready.)
Advanced Setup | Supplementary Information | Others
 

90°
180°