3.2.3 Dismantling
L
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
crushed or cut during dismantling.
L
WARNING: Risk of injury - Check the emergency stop (red pushbutton on the
control box) is activated, to avoid unintentional adjustment movements.
1. Secure the two casters at the back of the chassis by
pressing the caster brake plates down gently to their
end stops with the tip of your foot. To release the
brake, push the brake plate gently back up again with
the front of your foot until the casters are free.
3. Remove the leg support
4. Remove the footplate from the chassis of the patient
hoist.
Page 20
2. Remove the thorax support
from the slide column
with the locking pin
by the locking pin
Albatros II
2012-09
.
.