SEVERIN WK 3640 Instrucciones De Uso página 12

Hervidor de agua de viaje
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Thermal safety cut-out
The preset thermal safety cut-out protects
the heating element from overheating
should the appliance be erroneously
switched on without containing any water,
or if the heating element is calcifi ed. Once
the safety cut-out has switched off the
kettle, it must be allowed to cool down
suffi ciently, or must be descaled, before
being switched on again.
Before using for the fi rst time
For reasons of hygiene, boil and then
discard the fi rst two fi llings of water from
the new kettle.
Boiling water
∙ Set the voltage selector to the correct
voltage.
∙ Open the water container lid and fi ll the
container with water to the desired level,
observing the minimum and maximum
level marks.
∙ Close the lid.
∙ Insert the plug into a suitable wall socket
and use the On/Off switch to turn the
kettle on. The indicator light comes on.
∙ The boiling process begins. After
reaching boiling point, the appliance is
automatically switched off by the integral
steam cut-off device. The indicator light
goes out.
∙ To interrupt the boiling process, use the
On/Off switch to turn the kettle off.
∙ Always remove the plug from the wall
socket before pouring hot water.
∙ To prevent hot steam from being
emitted, ensure that the lid remains
closed while pouring.
12
∙ Do not leave any residual water in the
container.
Descaling
Depending on the water quality in your
area, lime deposits may build up on the
heating element. It is advisable to remove
any such deposits at regular intervals.
Any warranty claim will be null and void
if the kettle malfunctions because of
insuffi cient descaling.
When descaling, a mixture of 0.3 litres
of water to two tablespoons of vinegar is
suitable.
∙ Pour the descaler in.
∙ Switch the appliance on and let the
solution reach boiling point.
∙ Leave it to take effect for a short period.
∙ To clean the container after descaling,
rinse thoroughly with fresh water.
∙ Do not pour descalers down enamel-
coated sinks.
Sieve
If necessary, the sieve can be removed
from the spout for cleaning. Re-insert the
sieve afterwards.
Cleaning and care
∙ Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
∙ To avoid the risk of electric shock, do not
immerse the kettle in liquid and do not
clean it under running water.
∙ For cleaning, a slightly damp, lint-free
cloth may be used.
∙ Do not use abrasives, harsh cleaning
solutions or stiff brushes for cleaning.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wk 3644

Tabla de contenido