Installation And Adjustment; Tools; Manner Of Delivery; Anatomical Seat (Optional) - Vermeiren 708D Manual De Instrucciones

EN
NL
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
WARNING
 Only use the settings described in this manual.
 Variation of allowed adjustments can still change the stability of your wheelchair (tilt
back or sideways).

3.1 Tools

To set up the wheelchair the following tools are needed:
 Wrench set n° 10 to n° 19
 Allen key set n° 4 to n° 5
 Screwdriver Phillips head

3.2 Manner of delivery

The Vermeiren 708D shall be delivered with:
 1 frame with armrests, rear and front wheels
 1 pair footrests
 Backrest and seat cushions
 Tools
 Manual
 Accessories (optional)
 Pump (with pneumatic tyres only)
Before use, check if everything is included and that no products are damaged (for example
by transport, ...).

3.3 Anatomical seat (OPTIONAL)

CAUTION
Check that the seat is secure before use.
Avoid getting your fingers caught during the assembly process.
Risk of injury
If you have opted for an anatomical padded seat, place it on the
tubular cross-hinge so that the seat's supports engage equally
with the cross-hinge. In the wooden base you will find slots that
are placed in the hinge's cross-pieces. To fold the wheelchair,
remove the seat by pulling it upwards.
14
708D
2019-03
Installation and adjustment