Montreal V
First of all we wish to thank you for the trust
you placed in us by selecting a VERMEIREN
product.
Before using the lift chair, read the instruction
manual carefully: it will familiarize you with
this product.
If you have any further questions, please consult
your specialist dealer.
To find a service facility or specialist dealer near
you, contact the nearest Vermeiren facility. A list of
Vermeiren facilities can be found on the last page.
Visually impaired people can contact the dealer
for instructions for use.
1. Technical Specifications
Montreal V
Description
Total width
Dismantled width
Dismantled width (backrest)
Seat width
Height armrests
Seat height (Sit position)
Seat height (Lift position)
Total height (Sit position)
Total height (Recline position)
Total height (Lift position)
Dismantled height
(without backrest)
Dismantled height (backrest)
Total length (Sit position)
Total length (Recline position)
Total length (Lift position)
Dismantled length
(without backrest)
Dismantled depth (backrest)
Seat depth
Height backrest
Angle backrest
(Sit / Recline / Lift)
Angle legrest
(Sit / Recline / Lift)
Angle seat
(Sit / Recline / Lift)
Height adjustment
(measured on back side of
liftchair)
Distance from wall
Total weight (N.W.)
Mass of heaviest part (that
can be dismantled or
removed) (N.W.)
Masses of parts that can be
dismantled or removed. (N.W.)
Weight user
Noise level
Power
AC/DC Adapter
Degree of protection actuator
Subject to technical alterations – vG - 2017-03
VERMEIREN
Opening up new horizons in mobility
Dimensions
1 motor
850 mm
Not applicable
690 mm
485 mm
150 mm
500 mm
550 mm
1140 mm
1060 mm
1400 mm
640 mm
840 mm
830 mm
1520 mm
915 mm
820 mm
290 mm
510 mm
700 mm
8° / 35° / -19°
-90° / -6° / -27°
9° / 16° / -18°
580 mm
100 mm
53.98 kg
47 kg
Backrest:
6.98 kg
150 kg
<53 Db
220/230 V
Input: AC 100-240 V,
50/60 Hz
Output: DC29V
Max. 10%, max 2 min
IP42
Power rating, Duty cycle
actuator
Degree of protection manual
control
Storage and use temperature
Operating temperature of the
electronics
Storage and use humidity
Deviations in sizes and weight (15 mm en 1,5 kg) are
possible.
2. Explanations of symbols
Warning: Do not Pinch hands / fingers
CE conformity
Maximum mass
Indoor use
Separate recovery and recycling of
electric and electronic devices
Protection class II
Type designation
3. Components
7
1
2
6
5
1 = Backrest
2 = Armrests
3 = Seat
4 = Legrest
4. Location identification plate
Place the liftchair with the manual control in the lift
function, the lower frame will be visible. On these
lower frame you can find the identification plate
with CE logo and serial number.
DC24V, Max. 10%, max 2
min/18 min
IP42
+5 °C to +41 °C
-10°C to +40°C
30% to 70%
3
4
8
5 = Manual control
6 = Supply cable
7 = Headrest cover
8 = Leg Levelers