Vermeiren Sigma Manual De Instrucciones página 21

3.7.3 Operator console
The operator console has a swivel system and can be turned
horizontally to the left/right.
• Grab the control support (26) below the operator console and
move it left/right to the desired position.
3.7.4 Footrest B06
To remove
1. Pull footrest lever (27) and swing footrest (4) outwards.
2. Lift the footrest to remove it.
To install
1. Hold footrest (4) sideways and hang it in footrest support
(28).
2. Swing the footrest inwards until it clicks in position.
3.7.5 Footplate of B06
Angle
To change the angle of the footplate (5):
3. Loosen star knob (34) of toothed clamp (33) a few turns.
4. Turn the footplate up/down and hold it in desired position.
5. Tighten star knob (34).
6. Repeat this for the second footplate.
7. Make sure that both footplates are firmly secured.
3.7.6 Footplate of BZ10E
Fold the footplate (5) up to make room for passage.
27
17
Sigma, Sigma 230
2019-08
Using your wheelchair
4
28
33
34
5
EN
NL
26
5