Battery Switch - Vermeiren Sigma Manual De Instrucciones

EN
NL
•
Turn lever anticlockwise (position A) to connect the motor to the drive. This should be done
before starting the wheelchair.
Operating free-wheel lever
3.5

Battery switch

Your wheelchair is equipped with a battery switch (16) to interrupt the circuit between the power
module and batteries. The disconnection is used for safety during transport, maintenance and
repairs. It is also possible to remove the battery switch knob to prevent that the wheelchair is
moved during your absence.
C
Battery connected
Battery switch positions
Operation:
Turn the red battery switch (16)
• clockwise to "I" to connect the battery to the power module [C].
• anticlockwise to "0" to disconnect the battery [D].
• anticlockwise, passing "0" to its end position [E] and remove the knob from the switch.
A
Braking position
D
Battery disconnected
14
B
Free-wheel position
E
Disconnector end position
Sigma, Sigma 230
2019-08
Using your wheelchair