3.1
Tools
To set up the chair the following tools are needed.
Wrench set n° 17
•
Allen key set n° 6
•
3.2
Manner of delivery
The Vermeiren product shall be delivered with:
1 frame with shell chair and 4 wheels
•
1 wheel not mounted on the shell chair
•
1 legsupport
•
Tools
•
Manual
•
Accessories
•
Before use check if everything is included and that no products are damaged (example by
transport, ...).
3.3
Adjusting the seat height
WARNING:
Risk of injury – Make sure that no objects and or body parts are
caught between the adjustment systems.
WARNING:
Risk of injury – Adjusting can only be done by authorized people.
WARNING:
Risk of injury – Check that all screws have been properly fastened.
To adjust the seat height you can either make use of seat cushions of different diameters, or
set the shell chair itself at different heights on the frame. The shell chair must not be
removed during this process. The thickness of the seat cushions must be decided by the
purchase.
Thickness seat cushions
60 mm
80 mm
(Standard)
100 mm
60 mm
80 mm
100 mm
Seat height
450 mm
470 mm
(Standard)
490 mm
475 mm
495 mm
515 mm
Table 2: Seat heights
Charme
2011-09
Position
Hole 1
Hole 1
Hole 1
Hole 2
Hole 2
Hole 2