Mounting Or Removing Of Head Rest; Use Of Safety Harness - Vermeiren Charme Manual De Instrucciones

To remove the tray you can repeat the steps in opposite direction.
2.6

Mounting or removing of head rest

Mounting the head rest:
1. Take the head rest.
2. Check that the large edge is placed to the bottom.
3. Mount the head rest to the back of the shell chair by the elastic.
Remove the head rest from the back of the shell chair by the elastic.
2.7

Use of safety harness

WARNING:
Risk of injury – Adjust the safety harness that no strangulation of the
   
patient can appear and the patient can sit comfortable in the chair.
WARNING:
Risk of injury – Adjust the safety harness as close as possible to the
   
body of the patient so the patient cannot slide out the safety harness.
WARNING:
Risk of injury – Use the safety harness for patient that make extreme
   
movements. These can lead to falling out the chair.
When the patient has spasm or make restless movements the safety harness shall be used.
4. Mount the tray e to the frame of the tray d.
5. Put the two holes f into direction of the chair.
1. Mount the waist belt around the waist of
the patient.
2. Click the buckle of belt c into buckle of
belt d.
3. If needed adjust the waist belt.
4. Mount the safety harness around the body
of the patient.
5. Cross the harness around the back of the
shell chair.
6. Click the buckle of belt e into buckle of
belt f.
7. If needed adjust the safety harness.
ƒ‰‡
Charme
2011-09