Running Wheels / Parking Brakes; Mounting Or Removing Of Tray - Vermeiren Charme Manual De Instrucciones

Inclination set by an attendant c:
1. Engage the brakes.
2. Pull/Push the push bar c in the desired direction to incline the shell chair
backwards or set in the horizontal position (+30° to -10° ).
3. The leg support shall also inclined.
Inclination set by the user d:
1. Engage the brakes.
2. Pull/Push the on the hand grips d in the desired direction to incline the shell
chair backwards or set in the horizontal position (+30° to -10° ).
3. The leg support shall also inclined.
2.4

Running wheels / Parking brakes

WARNING:
Risk of injury – Lock all four wheels in place to put the shell chair in a
   
parking position.
WARNING:
    Good operation of the brakes is influenced by wear and
contamination of the tires (water, oil, mud, ...) – Check the condition of the tires
before each use.
WARNING: The brakes are adjustable and can wear – Check the operation of the
   
brakes before each use.
CAUTION: Risk of unintended movement – Make sure the shell chair is on a flat
   
horizontal surface before releasing the brakes. Never release all the brakes
simultaneously.
2.5

Mounting or removing of tray

WARNING:
Risk of tipping over – Do not overload the tray. The maximum weight
   
shall be 1 kg.
Mounting the tray:
1
Engaging the parking brakes
With your foot, press the black brake plate of the four
wheels positioned on the side downwards till it locks
in place. The wheels cannot roll.
Disengaging the parking brakes
2
With your foot, press the black brake plate of the four
wheels positioned on the side in the direction of the
frame. The wheels have now been released and can
both roll and swivel.
1. Loosen screw c.
2. Mount the pen of the frame of tray d to the
bushing of hand grip e.
3. Retighten screw c firmly by hand.
ƒ‰‡
Charme
2011-09