Default Values Of Alarm Parameters; Default Values Of Digital Output Parameters; Information Menu - CARLO GAVAZZI WM20 Manual De Instrucciones

Default values of alarm parameters

Alarm
1
2

Default values of digital output parameters

Digital
Function Al link
output
1 Puls
2
Alar

Information menu

The information menu contains all pages that display information and parameters entered
without password protection.
NOTE: presence of the pages depends on the installed accessory modules.
Page title
12345678
Conn
(2 pages)
Dmd
Led pulse
Run hour
32
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
Enable Variables
No VL1N
No Wsys
Al status
Al 1 Ne
Al 2 Ne
Information displayed
• Serial number (page title)
• Year of manufacture
• Firmware revision
• System type (in title)
• Current transformer ratio (Ct)
• Voltage transformer ratio (Vt)
Interval for average power calculation (min)
Weight of pulse of front LED (kWh/kvarh per pulse)
Current threshold for calculating load operating hours (A)
Set 1 Set 2
40 40
40 40
Pulse Pulse
type weig
kWh 0.1
kWh 0.1
On delay
0
0
Power
Out test
test
No 0.001
No 0.001