CARLO GAVAZZI WM20 Manual De Instrucciones página 51

Function Description
Remote control: output status managed via
Remo
communication
Pulse: pulse transmission output on active
or reactive, imported or exported energy
Puls
consumption. A pulse transmission test can
be run.
NOTE *: the alarms must be set in pages Virt al 1 and Virt al 2.
To set alarm parameters, see "Settings menu" on page 24.
Parameters
-
• Type of energy (Pulse
type)
• Pulse weight (Pulse
weig)
• Test transmission
enable (Out test)
• Power value for test
(Power test)
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
51