Resetting Total Energy Meters - CARLO GAVAZZI WM20 Manual De Instrucciones

Ocultar thumbs Ver también para WM20:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6. View the next page (Reset dmd).
7. Modify the parameter and select the option YES.
8. Confirm the operation: the message "Saving" is displayed and all the average values
are reset.
9. View the next page (Res dmd max).
10. Modify the parameter and select the option YES.
11. Confirm the operation: the message "Saving" is displayed and all the average
maximum values are reset.
Resetting without password access, from the reset menu
1. From any page in the measurement menu, enter the reset menu: the Reset dmd ?
page is then displayed
2. Select the option YES.
3. Confirm the operation: the message "Resetting" is displayed and then the page
Reset max?.
4. Select the option YES.
5. Confirm the operation: the message "Resetting" is displayed and then the page Res
dmd max?.
6. Select the option YES.
7. Confirm the operation: the message "Resetting" is displayed and then the
measurements page set in the Home page.

Resetting total energy meters

The analyzer measures the active and reactive energy, both imported and exported. The
total meters are displayed and can be reset directly via the main unit, while partial meters
are via communication.
The following section outlines the procedure to simultaneously reset the total meters for
active and reactive energy imported and/or exported.
1. From any page in the measurement menu, enter the settings menu: the
Password?page is then displayed.
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
39

Publicidad

Tabla de contenido
loading

Tabla de contenido