Storage - Makita EM4350RH Instrucciones De Manejo

STORAGE

WARNING:
DANGER:
Drain fuel from the fuel tank and carburetor according to the following
●
procedure:
1) Remove the fuel tank cap, and drain fuel completely.
If there is any foreign matter remaining in the fuel tank, remove it
completely.
2) Pull out the fuel filter from the refill port using a wire.
3) Push the primer pump until fuel is drained from there, and drain fuel coming
into the fuel tank.
4) Put the filter to the fuel tank, and securely tighten the fuel tank cap.
5) Then, continue to operate the engine until it stops.
Remove the spark plug, and drip several drops of engine oil through the spark
●
plug hole.
Gently pull the starter handle so that engine oil will spread over the engine, and
●
attach the spark plug.
Attach the cover to the metal blade.
●
In general, store the machine as illustrated. Pay full attention how to store the
●
machine to prevent the straight shaft from falling. Otherwise it may result in
personal injury.
Keep the drained fuel in a special container in a well-ventilated shade.
●
Attention after long-time storage
Before startup after long-time shutdown, be sure to replace oil (refer to P. 23). Oil will deteriorate while the machine is kept out of operation.
●
The engine is still hot just after stopping engine. When draining the fuel, allow sufficient time for the engine
to cool down after stopping it. Otherwise a skin burn and/or fire may result.
When the machine is kept out of operation for a long time, drain all fuel from the fuel tank and carburetor,
and keep it at a dry and clean place.
27