Bosch BCR1 Serie Instrucciones De Uso página 81

Cleaning programmes and operating modes en
SPOT cleaning programme
12
12
Fig.
With the SPOT cleaning programme, the robot vacuum
thoroughly cleans an area measuring approximately one
square metre.
When operating the robot vacuum using the buttons, it
must be placed in the centre of this area; when using
the Home Connect App, the robot vacuum will move
to this area automatically. The robot vacuum will then
move over and clean this area in parallel lines.
Once the area has been cleaned, the robot vacuum will
return to where it started.
This cleaning programme can only be used in Power
mode.
You can find detailed information about the operating
17
modes in the "Operating modes" section. Fig.
81