Setting Up - Bosch BCR1 Serie Instrucciones De Uso

Home Connect
19
20
86

Setting up

To configure settings via Home Connect, you will need
to have installed the Home Connect app on a mobile de-
vice such as a smartphone or tablet. Refer to the Home
Connect documents supplied for more information.
Follow the steps specified by the app to apply the set-
tings.
Press the "Wireless network" button on the robot vac-
uum to connect it to your wireless local area network.
19
Fig.
Switch the robot vacuum on.
The robot vacuum is ready to use. This will be indicated
by the buttons flashing at 5 second intervals.
20
Fig.
If the "Wireless network" button lights up white, the
robot vacuum is active and can be connected to a wire-
less local area network.
Note
Please make sure your router is configured to support
communication between devices with wireless net-
working functionality.
Note
Make sure that the robot vacuum is not in energy-saving
mode.
Note
You can find
nect your Roxxter to the Home Connect app at
https://www.home-connect.com/gb/en/help-support/
set-up. The Home Connect app also contains other vid-
eo tutorials about the Roxxter's functions.
out more about
en
how to con-