Cleaning The Brush Roller - Bosch BCR1 Serie Instrucciones De Uso

Cleaning and care
46 a
b
c
106
Note
The cartridge filter being dirty may cause the "Empty
dust box" indicator to light up.
The cartridge filter should be cleaned regularly to keep
the robot vacuum working at its best.
For more hygienic handling, we recommend changing
the filter.

Cleaning the brush roller

!
Caution
The robot vacuum must be switched off before
cleaning the brush roller.
Note
The brush roller is also self-cleaning. Use scissors to cut
the hairs and fibres lengthways on two opposite sides.
Then operate the brush roller for 30 seconds to vacuum
these up automatically.
Note
To avoid scratching the top of the appliance, place it on
a soft surface when turning it over.
46
Fig.
a) Lift the robot vacuum up and turn it over.
b) Press the brush roller release button to remove it
from the robot vacuum.
c) Lift the cable guard up fully.
en