Toledo Keyless Manual Del Usuario página 10

6.User Code
6-1 The preset user code is 1234.
Please delete it and create new one when fi rst time operation.
6-2 Up to 6 sets of User Codes can be saved.
6-3 User Code is only for unlocking the lock, without programming function.
6-4 User Code is 4 to 10 digits in length.
6-5 User Code can be deleted or added anytime if needed.
7.Delete lndividual User Code
7-1 User Codes can be deleted individually. You can re-set the same number
as code even it's deleted before.
7-2 Programming Code is needed when deleting lndividual User Code.
8.Delete All User Codes At Once
8-1 All the User codes can be deleted at once. You can still reset the same numbers
as codes even they are deleted before.
8-2 Auto-locking and Keypad locking function will be invalid after deleting all User
Codes and the lock can only be operated by key. These functions will be restored
when recreate new User Codes.
8-3 Programming Code is needed when deleting all User Codes.
9.Temporarily Disable All User Codes
9-1 Auto-locking and Keypad locking function will be invalid when User Codes
are temporarily disabled. The lock can only be operated by key during the time.
9-2 Repeat the programming steps again to restore the auto-locking, keypad locking
function and User Codes.
10.Create a Disposable User Code
10-1 Disposable User Code will be no longer valid once being used.
10-2 You can reset same number as Disposal User Code again.
10-3 Programming Code is needed when creating a Disposable User Code.
11.Restore Preset Factory Code
11-1 You can restore Preset Factory Code by pressing "R" button on the interior receiver
module when you forget Programming Code or you want to cancel all previous
setting.
11-2 After restore the Programming Code will be 0000. The User Code will be 1234 again.