Ke Y Less Electronic Lock; Installation Instructions; Drill Holes - Toledo Keyless Manual Del Usuario

Ke y less Electronic Lock

a. The backset shown on the left is 60mm (2-3/8").
b. Pull the cam toward right to extend the backset to 70mm (2-3/4").
c. The backset shown in fi gure C is 70mm (2-3/4"). Pull the cam back to left
will return the backset to 60mm (2-3/8").
Note: The shape of cam must be square.
a
1. MARK THE DOOR WITH TEMPLATE

2. DRILL HOLES

INSTALLATION INSTRUCTIONS

The BACKSET is the distance between the center of
cross bore and edge bore of the door. Adjustable
latch fi ts both BACKSET of 2-3/8" (60mm) and 2-3/4"
(70mm). Please follow the steps shown below for
BACKSET adjustment.
b
Select the height and backset as desired on the
boor face. Use the template as an indication to
the center of the circle on the door face and the
center of the door edge.
Using the marks as a guide to drill a hole
ø 2-1/8" (54mm) through the door face for the
lockset, then a hole of ø 1" (25mm) for latch.
c