Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9. CHANGE LEVER HANDLING
a. Be sure the levers are unlocked. Insert the provided pin wrench into the
small hole on the neck of lever and apply pressure to depress the catch and
pull out the lever from the stem. Follow the same steps to remove interior
lever and exchange the position of inside and outside levers.
b. Remove the cylinder from lever and insert it into opposite lever. Then
install the levers and make sure the small hole on the neck of lever aligns
over the catch perfectly. Rotate the levers to see if it operates well.
Cylinder
4
5
3
2
1
9
8
0
7
6
4
5
3
2
1
9
8
0
7
6
Publicidad
Tabla de contenido
