Toledo Keyless Manual Del Usuario página 11

12.Unlock the door
12-1 The lockset will be unlocked by key or by pressing the User Code on keypad from
outside or by the interior turn-button.
12-2 To unlock the door on the keypad, enter the User Code and then press the
Programming/Enter button.
13.Lock the door
The lockset will be locked by key or by pressing the Programming Button on keypad
from outside or by the interior turn-button.
14.To Activate / Deactivate Auto-Locking Function
14-1 The lockset will automatically lock itself within 10 to 99 seconds when this function
is programmed.
14-2 This function is not preset at the beginning. It can be set if needed.
14-3 The preset delay-time is 30 seconds, you can adjust the time as you want.
14-4 Please repeat the same programming steps to cancel Auto-Locking function
when needed.
15.Toggle Mute On/Off
15-1 You will hear beep sounds when pressing keypad, programming or operating
errors. lt can be turned off if needed.
15-2 LED lllumination is still functioning when it is in mute. Therefore will not be any
warning alarm, we suggest not to mute the beeper if it's not necessary.
15-3 Motor operating sound cannot be muted.
16.Code Protection Function
The system will shut down if entering unauthorized codes over 5 times.
The System will be operative again after 45 sec.
17.lllumination
The LED Keypad will light up when pressing any button for ease of operating in the dark.