Toledo Keyless Manual Del Usuario página 4

3. IDENTIFY DOOR HANDLING
Face the door from outside. The door is left handed if the hinge is on the
left hand side of the door, whereas the door is right handed if the hinge
is on the right-hand side of the door.
Left Handed
4. INSTALL LATCH
Interior
Door
Exterior
a. Insert the latch and lay the faceplate against
the door edge. Use a pencil to mark it's
perimeter, then take out the latch.
b. Chisel out the portion you have marked with
the pencil for about 4mm (5/32") deep. Score
the area within the borders as clearly and
precisely as possible. Ensure the plate can
fi t fl ush with the door edge surface.
c. Insert the latch and tighten it with screws.
Be sure the holes for thru-bolts (next to the
adjustable cam) should be horizontally aligned.
d. There is no necessary to chisel the door edge
for the faceplate installation if you use the
drive-in latch. You may install it into the edge
bore directly. Be sure the bevel face the outside
assembly.
Hinge
Right Handed