Using The Unit; Cutting Techniques - Stihl HSE 60 Manual De Instrucciones

Ocultar thumbs Ver también para HSE 60:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English / USA

Using the Unit

Cutting season
Observe all national, state and local
regulations and ordinances regarding
hedge trimming.
Cutting sequence
Use lopping shears or a saw to cut out
thick branches first.
Cut both sides of the hedge first, then
the top.

Cutting techniques

Always keep supply cord away from the
cutting area.
14
Vertical cut:
Swing the cutting blade from the bottom
upward in an arc – lower the nose of the
blade, move along the hedge and then
swing the blade up again in an arc.
Horizontal cut:
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally.
Swing the blade in an arc towards the
outside of the hedge so that the cuttings
fall to the ground.
HSE 60, HSE 70

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hse 70

Tabla de contenido