Starting; Connecting To Power Supply; Extension Cords; Strain Relief - Stihl HSE 60 Manual De Instrucciones

Ocultar thumbs Ver también para HSE 60:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Starting

1
2

Connecting to power supply

The voltage of your power supply and
the voltage specified on the unit must be
the same. Use an extension cord
specifically approved for outdoor
applications.
HSE 60, HSE 70

Extension cords:

Minimum wire size for extension cords
for 120 Volt appliances:
Cord types
SJW-A or SJTW-A
Round jacketed cords.
Cord length (ft)
25
50
Wire size (AWG) 18
16
Listed by UL, W-A marking on cable
jacket indicates "outdoor use."
Appropriate extension cords are
available in stores specializing in
electrical equipment.
!
Warning!
Extension cord reel:
If your extension cord is stored on a reel,
always unwind it completely before use.
A coiled extension cord can retard the
flow of electricity and cause overheating,
which can lead to a short circuit or fire.
The reel should be equipped with
thermal protection.
100 150
16
14

Strain relief

:
Make a loop (3) in the extension
cord and pass it through the
opening (4).
:
Slip the loop over the hook (5) and
pull it tight.Secure cord in position
with lock lever (6).
English / USA
3
5
4
6
15

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hse 70

Tabla de contenido