To Use The Quick Release Function; Harness Safety; Safety Instructions For Maintenance - Husqvarna 340iBT Manual Del Usuario

sells your product is not a servicing dealer, ask him
for the address of your nearest service agent.
To do a check of the power lever
1. Release the power trigger and make sure that the
product stops.
2. Push the power lever to the stop position.
3. Make sure that the power trigger is locked.
4. Push the power lever to the start position.
5. Make sure that the power trigger moves freely.
6. Push the power lever to cruise control position.
7. Make sure that the power trigger moves freely.
To do a check of the power trigger
1. Make sure that the power lever is not set to the
stop position.
2. Push and release the power trigger to make sure
that it moves freely.

Harness safety

WARNING:
warning that follows before you operate the
product.
8
The harness must always be worn when working with
the product. Failure to do so means you will be unable
to operate safely and this can result in injury to yourself
or others. Make sure that the chest strap is buttoned
and correctly adjusted. There is a risk that an unclosed
strap can get stuck or sucked into the fan of the
product.

To use the quick release function

If an emergency occurs, remove the backpack blower
quickly.
1. Push the clip and remove the strap.
2. Remove the harness.

Safety instructions for maintenance

• Remove the battery before you do maintenance,
other checks or assemble the product.
• The operator must only do the maintenance and
servicing shown in this operator's manual. Speak to
your servicing dealer for maintenance and
servicing of a larger extension.
• Keep all nuts, bolts and screws tight to be sure the
product is in safe working condition.
• Replace worn or damaged parts.
• If you do not do maintenance, it decreases the life
cycle of the product and increases the risk of
accidents.
• Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after maintenance, speak to your
servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Read the
• Only use original spare parts.
WARNING:
warning instructions that follow before you
do maintenance on the product.
1166 - 007 - 30.06.2020
Read the