Battery Pack - Panasonic EY4542 Manual De Instrucciones

XI
. ACCESSORIES
WARNING
• The use of any accessories not specified
in this manual may result in fire, electric
shock, or personal injury. Use recommended
accessories only.
• Use of a blade on material that is thicker
or thinner than that recommended for that
blade will result in a rough cut, and could
increase the risk of "kickback" or other injury.
Carbide-tipped Blade for Metal
• EY9PM13C
For cutting unhardened ferrous material
Thickness of material
0. mm – .0 mm (1/3"-1/4")
Carbide-tipped Blade for Thin Metal (Optional
accessory)
• EY9PM13D
For cutting unhardened thin ferrous thin material
that clean cutting edge required
Thickness of material
0. mm – .0 mm (1/3"-1/4")
XII
. SPECIFICATIONS
Motor voltage
Blade speed
Blade size
Outside diameter
Arbor size
Maximum cutting depth
Overall length
Weight (with battery pack: EY9L40)

BATTERY PACK

Model
Storage battery
Battery voltage
Capacity
Carbide-tipped Blade for Wood (Optional
accessory)
• EY9PW13A
For cutting wood in general
Carbide-tipped Blade for Thin Wood (Optional
accessory)
• EY9PW13B
For cutting thin wood that clean cutting edge
required
Recommended thickness of material up to 1
mm
Carbide-tipped Blade for Plastic (Optional
accessory)
• EY9PP13B
For cutting plastic
Recomneded thickness of material acrylic and
vinyl chloride plates:
.0 mm – .0 mm (/4" – 3/1")
corrugated pates, pipes
0.8 mm – .0 mm (1/3" – 3/1")
Vacuum hose adaptor (Optional accessory)
• EY9X01E
Rip Fence (Optional accessory)
• EY300B777
For convenience of rip cuts and repeated cut of
uniform width
14.4 V DC
300 min
13 mm (-3/8")
0 mm (/3")
0 – 4 mm (0" – 1-13/1") (φ13 mm blade)
39 mm (1-1/4")
. kg (.7 lbs)
EY9L40
Li-ion Battery
14.4 V DC (3. V x 4 cells)
3 Ah
- 0 -
(rpm)
-1