Attaching Or Removing Battery Pack - Panasonic EY4541 Manual De Instrucciones

Attaching or Removing Battery
Pack
1. To connect the battery pack:
Line up the alignment marks and at-
tach the battery pack.
• Slide the battery pack until it locks
into position.
2. To remove the battery pack:
Push on the button from the front to
release the battery pack.
VI. OPERATION VI.
1. Push the switch lock lever down, pull
Alignment
marks
2. Once cutting is finished, release the
3. Check that the temperature of the blade
Cutting Cutting
NOTE:
Button
- 12 -
OPERATION
the power switch.
• The speed increases with the amount
of depression of the power switch.
power switch.
has dropped sufficiently, and then re-
move the blade.
• Check that there are no obstacles
to cut underneath workpiece.
• Check that there are no objects such
as nails in the material to be cut.
If the blade comes into contact with
any such objects during cutting, a
strong reaction force will be gener-
ated and severe injury may occur.
• Do not place your hand on the object
in the direction cutting is to take place.
If this is not observed, there is a risk
of injury.
• Do not touch the jigsaw blade im-
mediately after cutting.
If this is not observed, burns may oc-
cur.