To Assemble The Handlebar (Optional Accessory); To Assemble The Flat Nozzle (Optional Accessory); Operation; Premixed Fuel - Husqvarna 350BT Manual Del Usuario

5. Attach the intermediate pipe to the control pipe.
Note: If it is a requirement to use a longer circular
blower pipe, an extended intermediate pipe is
available.
6. Attach the blower nozzle to the intermediate pipe.
Note: The blower nozzle can only be installed on the
intermediate pipe.
To assemble the handlebar (optional
accessory)
1. Disassemble the intermediate pipe.
2. Remove the knob from the holder and push the
holder onto the control pipe.
3. Install the handlebar and the knob. Tighten the knob.
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
Fuel
This product has a two-stroke engine.
CAUTION: Incorrect type of fuel can result in
engine damage. Use a mixture of gasoline
and two-stroke oil.
1246 - 001 - 14.02.2020
4. Assemble the intermediate pipe.
To assemble the flat nozzle (optional
accessory)
The flat nozzle gives a higher air speed than the blower
nozzle.
• Remove the blower nozzle from the intermediate
pipe and install the flat nozzle.

Operation

Premixed fuel

• Use Husqvarna premixed alkylate fuel for best
performance and extension of the engine life. This
fuel contains less harmful chemicals compared to
regular fuel, which decreases harmful exhaust
fumes. The quantity of remains after combustion is
lower with this fuel, which keeps the components of
the engine more clean.
7