Catcher; Cutting Height; Filling With Oil - Husqvarna LC 140 Manual De Instrucciones

Ocultar thumbs Ver también para LC 140:
Tabla de contenido

Publicidad

Catcher

Assembly
Fit the catcher bag.
Insert the catcher bag's edging strip into the groove
around the upper cover and press on the strip to the
end.
Fasten the three snap fasteners around the bar of the
upper cover.
Attach the hooks in the upper edge of the chassis.
Fit the bagger bottom in the discharge hole.
8 – English
ASSEMBLING AND ADJUSTMENTS

Cutting height

CAUTION! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.
The cutting height can be adjusted in 10 different steps.
Move the lever to the back for higher cutting height
and to the front for lower cutting height.

Filling with oil

The oil tank is empty at delivery. Fill the oil slowly. See
also instructions under the Maintenance heading. The
engine oil should be changed the first time after 5
hours running time.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lc 140s

Tabla de contenido