To Install The Air Intake Cover (Optional); Operation; Bluetooth ® Wireless Technology; Husqvarna Connect - Husqvarna T540i XP Manual Del Usuario

10. Tighten the saw chain. Refer to
of the saw chain on page 23 for instructions.

To install the air intake cover (optional)

If you cut materials that cause much dust and small
particles in the air, a air intake cover is recommended
for use.
1. Hold the air intake cover against the fan housing.
Make sure to put the hole in the air intake cover on
the right side of the hole in the fan housing.
2. Carefully push the air intake cover against the fan
housing until you hear a click.
3. Push the air intake cover to the left until the holes
align.
Introduction
WARNING: Read and understand the safety
chapter before you use the product.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product.
• Extended product information.
• Information about, and help with, product parts and
servicing.
12
To adjust the tension
CLICK!

Operation

4. Install the screw.
®
Bluetooth wireless technology
Products with built-in Bluetooth
can connect to mobile devices and enables additional
functions from connect.
Bluetooth
The symbol for
on when your mobile device is connected to the product.
®
wireless technology
®
wireless technology comes
1036 - 003 -